Considering the upgrade to LED technology but don’t want to replace all of your existing lights? LED retrofit kits from LITELUME can help convert your existing fluorescent fixtures into energy efficient LED fixtures. LED retrofit kits can provide both energy savings and maintenance savings long term. LED retrofit kits come in a variety of configurations, color temperatures, 0-10V dimming, and can also utilize smart lighting controls. US LED retrofit kits are DLC Listed for end users to take advantage of local or state utility rebates.
LED troffer retrofit kits are available to retrofit 1×4, 2×2, and 2×4 fluorescent troffers and eliminate the need for fluorescent tubes. These LED troffer retrofit kits easily install in minutes out in the field by utilizing the existing housing and help avoid disturbing the ceiling. This is a primary benefit for applications like hospitals or schools where there are restrictions for disturbing the plenum space.
LED retrofit kits are ideal for applications that want to upgrade to LED lighting but not have to replace all of the existing lights completely. Most importantly, some applications are restricted from disturbing the ceiling or getting into the plenum space. LED retrofit kits are ideal for classrooms, hospitals, healthcare facilities, hospitality, offices, industrial spaces, warehouses, and other commercial spaces. For areas that might have moisture present, like utility rooms or bathrooms, US LED retrofit kits are damp location rated.
The Flat Panel Retrofit Kit is the easy and cost-effective solution to upgrade fluorescent troffers to LED. The kit utilizes the existing troffer housing, thereby reducing labor time and expense since installation can be performed from below the ceiling.
The kit’s edge lit LED light source delivers uniform illumination with minimal glare, and creates a clean aesthetic that is perfect for offices, retail, health care, educational, hospitality and other commercial facilities.
Retrofitting is the process of enhancing old technology or features of an already laid downlighting system to increase efficiency and operation while saving money.
A retrofit kit is a kit designed to enable an owner to cut back on altering all lighting fixtures in a building by providing solutions that see the replacement of existing bulbs and/or the ballast of fluorescent lights and other conventional lighting fixtures.
Standard retrofit kits usually contain drivers, installation hardware like screws, and so on. You will find brackets, sockets, fasteners, reflectors built to channel light from the fixture to the required space.
LED retrofit kits are used in situations where the structure and design of your lighting system are satisfying to the owner, but the efficiency of lights and lighting needs to be modified for a better experience.
Most of the lighting fixtures date as far back as 70 years and are less efficient with lower watt options. LED retrofit kits are made to offer the chance to boost this low lighting output, as they have vast wattage alternatives, color temperature, and so on.
Replacing entire fixtures would occasionally require drawings that are usually very costly, and unless there is a dissatisfaction with the setup of lighting fixtures, retrofitting saves between 50-70 percent in cost and is, therefore, a better option. New fixtures are expensive, and retrofit kits are a lot more cost-effective and economical. Asides from being economical, LED retrofit can help to brighten up dim spaces easily.
Yes, they do. As long as the LED driver is a high-voltage driver, while lighting control choice depends on the type of retrofit kits required or being fixed.
Any kit that best fits in your fixture or lighting area is the best kit for you. If there is a need for confirmation, you can get a lighting plan created by the installation company to model your space with the lights before fitting.
As long as you follow the installation instructions that come with them, Retrofit kits are rather easy to install. Since they are designed to replace old units in existing fixtures of light, it is easy to remove existing lamps, sockets, or ballasts as the case may be and replace them. The kits come with bulbs, lamp/heads, brackets, etc, and they normally need little wiring alterations and modifications.
Retrofit kits come with the UL classified mark on the installation instructions. You can also search on the UL certification database for confirmation. If the kits are certified as UL1598C retro kits, then you are good to go.
Retrofit kits vary per type and space but LED lighting, manufactured and certified, remains a better option than traditional lighting fixtures.
As one of the best lighting manufacturers in the United States, LITELUME produces a wide variety of indoor and outdoor retrofit light fixtures to accommodate all of your customers’ commercial and residential electrical and lighting project needs. All of our lights come with financing options available. For electricians, contractors and lighting distributors, we provide labor warranties and can help with creating a proposal. Click here for more information about LITELUME.
LITELUME stands behind the quality of its lighting products by offering a 10-year Limited Warranty for all of our light fixtures, mounts, sensors, and more. We also offer a return policy just in case. We provide a number of Financing Options that are also available. Fill out a submit one of our Credit Applications today!
Got a project? Need to order light fixtures in bulk or resell as a distributor? LITELUME is here for all your commercial and residential property lighting needs. Contact us today at (833) 533-5863 or email us at firstname.lastname@example.org.