The MC031V sensor is innovative and active motion detectors with HF system 5.8GHz. Motion can be detected through plastic, glass and thin non-metal materials. except the higher mounting height 15m Max.

The sensors allow energy saving without compromising comfort. When used in combination with 1-10V dimmable LED drivers or ballasts, they can achieve 3-step dimming function, which is perfect for use in some areas that requires a light change notice before totally switch off.

Also, the 1-10V interface in the sensors can match up with Merrytek stand-alone daylight sensor MS01, and implement daylight harvesting, means the lighting system has automated controls that either turn off or dim artificial light in response to the available daylight in the space

See Spec Sheet

Specifications:

Operating Voltage:

120~277VAC, 50Hz/60Hz

Rated Load:

400W@120Vac, 800W@220-277Vac (inductive)
800W@120Vac, 1200W@220-277Vac (resistive)

HF System:

5.8GHz±75MHz, ISM wave band

Transmitting Power:

<0.5mW

Power Consumption:

≤0.8W(standby), <1.5W(operation)

Detection Zone:

Max.(D x H): 16m x 15m

Detection Sensitivity:

100% / 50%

Hold Time:

5s / 30s / 90s / 3min / 20min / 30min

Daylight Sensor:

50lux / 100lux / 200lux / Disable

Stand-by Period:

5s / 5min / 10min / 30min / 1h /+ ∞

Stand-by Dimming Level:

10% / 20% / 30% / 50%

Mounting Height:

15m Max.

Motion Detection:

0.5~3m/s

Detection Angle:

150°(wall installation),
360°(ceiling installation)

Operating Temperature:

-35°C~70°C

Fixture Ordering Information

ITEM #PART #DESCRIPTION
306MC031V-DMerrytek IP65 Rated Microwave Motion Sensor