Round Tapered Steel Direct Embed

Request A Quote Today

Pole Shaft:

Thee pole shall be a one section design conforming to ASTM A595 Grade A or ASTM A572 Grade 55 with a constant taper rate of .14 in/ft. Pole will be cylindrical in cross-section and will have a full length longitudinal weld.


Wire way access 24” below ground line. Mastic coating available for additional protection of embeded pole.


A reinforced hand hole, having a nominal opening of 3”x 5” or 4” x 6.5” will be installed 18” above the base plate. A hand hole cover with hardware will be included along with grounding provisions. 

Pole Top:

Each pole will be provided with a welded top plate and tenon or top cap for poles receiving  drilling for side mount fixtures.


Standard color finishes shall be coated with TGIC polyester powder or hot dip galvanized to ASTM A-123 specifications.

See Spec Sheet